|
The round style provides extra space along the sides of the enclosure, with maximum height near the center ridge. The pre-drilled frame is easily assembled with minimal handtools. All frame components are made from heavy duty galvanized steel. Main cover and doors are made from long life UV Resistant, Fire Retardant Polyethylene with woven backing.
All fabric components feature heat-welded seam construction. Unit features double zipper door on BOTH ENDS to allow drive-through capability, and good ventilation. Each door contains a pocket for a rigid pole at the base. The long lasting cover is designed with full flap provides for run-off of rain or melting snow and diverts water from entering through the perimeter of the cover. Each unit comes completely equipped with a set of earth anchors with 36" stainless steel tethers and a 36” drive rod to secure the unit at each corner and each frame arch.
Exclusive Extended Storage Features
- Heavy Duty Galvanized Finish on All Steel Frame
Components for Maximum Strength & Long Life
- Easy Bolt Together Design - all Pre-drilled & Cut
- Wind Brace Support on Both Sides
- Two(2) Double Zipper Doors with Bottom Pockets
- Protective Plastic Tube End Caps - All Open Ends
- Standard Thread Plated Hardware Kit with Retaining
Nuts & Protective SS Washers
- Quick Assembly Wrench included
- Heavy Duty Poly Rope for Main Cover Tie Down
- Heavy Duty Grommets on Cover & Doors
- Assembles in 2 hrs.
- Two Box Shipment - easily unloaded and transported.
|
Standard Specifications:
| Nominal Size |
12' Wide x 24’ Long x 8' High |
| Arches |
Seven (7) on 48" spacing
1-5/8" diameter frame members |
| Standard End Door Size |
Manway Door: 6'W x 8'H
Double Zipper Back Panel: 10’ W x 6'H |
| Available Colors |
Translucent |
| Shipping Weight |
344 Lbs. in Two (2) boxes shipped via motor freight |
| Box Dimensions |
House Style
Box 1: 63.5" Long x 17.5" Wide x 8" High
Box 2: 67" Long x 21.5" Wide x 8.5" High Round Style
Box 1: 57.5" Long x 15.37" Wide x 7.5" High
Box 2: 73.62" Long x 21.5" Wide x 9" High |
| Main Cover |
UV protected 24 mil, fabric backed poly. 10oz. weight |
| Fire Retardant Standard |
Main Cover & Doors meet CPAI -84 Section 5 |
| Anchors |
Six ( 6 ) 36" Anchors with U-Bolts & 36"Drive Rod Std. |
| Stock Number |
12x24x8(*)HSK
|
Click here to view assembly manual
| Available Options: |
| Please Select State to Ship To: |
|
| Vent Kit-2 per Kit: |
|
|